Cork Engrave
by [LE] Kyle on 2024-06-09 9:00 PM
Last Update: 2024-06-11 2:28 AM
| Material | Cork |
|---|---|
| Material Color | Not Applicable |
| Material Thickness (mm) | Any |
| Laser Source | DAVI 60W D60F (D60) 10.6μm |
| Expander Size | 8x |
| Aperture Size (mm) | 20mm |
| Lens Field Size (mm) | 110x110 |
| Lens Configuration | Single (SL1) |
| Software | LightBurn |
| Parameter Type | Fill |
| Fill 1 Power (%) | 30 |
| Fill 1 Speed (mm/s) | 2000 |
| Fill 1 Frequency (khz) | 20 |
| Fill 1 Line Interval (mm) | .1 |
| Fill 1 Angle | 45 |
| Fill 1 Pass Count | 1 |
| Fill 1 Fill Type | BiDirectional |
| Fill 1 Flood Fill | Off |
| Fill 1 Crosshatch | Off |
| Fill 1 Air Assist | Off |
| Line Power (%) | 30 |
| Line Speed (mm/s) | 2000 |
| Line Frequency (khz) | 20 |
| Line Pass Count | 1 |
| Line Air Assist | Off |
| Picture of Results |  |
| Screenshot of Settings |  |
| Notes | |
| I run this in focus, with the fill pattern first, and will optionally add a sublayer as a contour line if I really want to define the edges. Gives great contrast! No need to defocus. | |
Return to the menu
Submit a setting