All Settings Databases

16 TESTED SETTINGS

CO2 Gantry Settings.

Recovered CO2 gantry parameters for cutting, marking, and engraving.

16Total settings

Search and compareOpen a row for complete parameters

Use safelyTest on scrap and verify materials first

Photo	Title	Uploader	Material	Coating	Source	Lens
	1/8" MDF cutting 1 line	Vinny	MDF	None	JK ECO2 GSI HLC80B	101.6
	8mm Walnut Cut 1 line	[LE] Kyle	Walnut	None	RECI W4	50.8
	Acrylic Cell Cast Deep White 1 fill	[LE] Alex	Acrylic (Solid)	None	RECI W4	50.8
	Bamboo Marking 1 fill	Rohan lal	Bamboo	None	DAVI D35 (10.6µm)	50.8
	Coir Door Mats [coconut hair] 1 fill	{GCLE} Dave	Coir	None	RECI W8	50.8
	Cork Engrave 1 fill	[LE] Kyle	Cork	None	RECI W4	50.8
	Glass Frosted Look 1 fill	Danie	Soda-Lime Glass	None	JK ECO2 GSI HLC60W	25.4
	Glass General 1 fill	[LE] Kyle	Soda-Lime Glass	None	RECI W4	50.8
	Hardboard Cut 1 line	[LE] Kyle	MDF	None	RECI W4	50.8
	Hardboard Cut 1 line	[LE] Kyle	MDF	None	RECI W4	50.8
	Hardboard Engrave 1 fill	[LE] Kyle	MDF	None	RECI W4	50.8
	High Density Poly Ethylene (HDPE) 1 line	{GCLE} Dave	Polyethylene (High-Density)	None	RECI W8	50.8
	Picture on Wood 1 raster	Coby	Maple	None	JK ECO2 GSI HLC100B	50.8
	Rowmark LaserMax Brushed Bronze/Black Cut 1 line	[LE] Kyle	Acrylic (Solid)	None	RECI W4	50.8
	Rowmark LaserMax Brushed Bronze/Black Engrave 1 fill	[LE] Kyle	Acrylic (Solid)	None	RECI W4	50.8
	Wood Picture Engraving 1 fill	Lorenzo Parra	Maple	None	JK ECO2 GSI HLC100B	50.8